VU24JD-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VU24JD-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Hum*	Pres*	CPU*	RSSI*
1789950256	33.5 C	62.8 %	1004 hPa	39 C	48 dBm
1789949348	33.5 C	63.2 %	1004 hPa	39 C	49 dBm
1789948439	33.5 C	63.2 %	1004 hPa	39 C	48 dBm
1789947531	33.5 C	63.2 %	1004 hPa	39 C	47 dBm
1789946622	34 C	63.2 %	1004 hPa	39 C	44 dBm
1789945713	34 C	63.2 %	1004 hPa	39 C	49 dBm
1789944805	34 C	63.6 %	1004 hPa	39 C	44 dBm
1789943896	33.5 C	64 %	1004 hPa	39 C	45 dBm
1789942987	33.5 C	64 %	1004 hPa	39 C	48 dBm
1789942098	33.5 C	64.4 %	1004 hPa	39 C	48 dBm
1789941170	33.5 C	64.8 %	1004 hPa	39 C	48 dBm
1789940262	34 C	64.8 %	1004 hPa	38.5 C	49 dBm
1789939353	34 C	64.4 %	1004 hPa	39 C	49 dBm
1789938445	36 C	58.4 %	1004 hPa	40 C	49 dBm
1789938023	36 C	58.4 %	1004 hPa	40 C	46 dBm
1789937114	36.5 C	58.4 %	1004 hPa	40 C	46 dBm
1789936205	36.5 C	58.4 %	1004 hPa	40 C	47 dBm
1789935297	36.5 C	58 %	1004 hPa	40 C	43 dBm
1789934388	36.5 C	58 %	1004 hPa	40.5 C	43 dBm
1789927672	29 C	79.6 %	1008 hPa	26.5 C	42 dBm
1789905384	39 C	55.2 %	1004 hPa	40.5 C	51 dBm
1789904475	39 C	55.2 %	1004 hPa	40.5 C	51 dBm
1789903567	39.5 C	54.4 %	1004 hPa	40.5 C	50 dBm
1789902658	39.5 C	53.2 %	1004 hPa	41.5 C	49 dBm
1789901749	39.5 C	53.6 %	1004 hPa	40.5 C	51 dBm

*Used Equation Coefficients:

Temp: 0, 0.5, 0

Hum: 0, 0.4, 0

Pres: 0, 4, 0

CPU: 0, 0.5, 0

RSSI: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)