This is the latest recevied telemetry packets stored in our database for station/object OE6ERD-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time
Press*
Temp.in*
Hum*
QNH*
Temp.out*
1789945961
1024.5 hPa
23.1 C deg
98.1 %
1024.8 hPa
0 C deg
1789944146
1024.6 hPa
23.2 C deg
98.1 %
1025 hPa
0 C deg
1789942331
1024.9 hPa
23 C deg
99.9 %
1025.2 hPa
0 C deg
1789940516
1024.9 hPa
23.5 C deg
95.8 %
1025.3 hPa
0 C deg
1789938701
1025.1 hPa
22.9 C deg
98.1 %
1025.5 hPa
0 C deg
1789936886
1024.9 hPa
23.3 C deg
93.2 %
1025.3 hPa
0 C deg
1789935071
1024.6 hPa
23.3 C deg
93.1 %
1025 hPa
0 C deg
1789933255
1024.8 hPa
23.3 C deg
91.8 %
1025.1 hPa
0 C deg
1789931440
1024.9 hPa
23.4 C deg
90.7 %
1025.2 hPa
0 C deg
1789929625
1024.6 hPa
23.6 C deg
87.4 %
1025 hPa
0 C deg
1789927810
1024.5 hPa
23.6 C deg
88.6 %
1024.9 hPa
0 C deg
1789925995
1024.4 hPa
23.8 C deg
86.2 %
1024.8 hPa
0 C deg
1789924180
1024.4 hPa
24.5 C deg
81.1 %
1024.8 hPa
0 C deg
1789923822
1024.4 hPa
24.1 C deg
83.9 %
1024.8 hPa
0 C deg
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0). The sent equation coefficients is used in the equation: a * value2 + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)