SP2WEK Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP2WEK. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	CPU Temp*	CPU Usage*
1781385005	28 Deg.C	2 %
1781384401	29 Deg.C	2 %
1781383805	29 Deg.C	2 %
1781383202	29 Deg.C	2 %
1781382602	29 Deg.C	2 %
1781382005	30 Deg.C	2 %
1781381402	29 Deg.C	2 %
1781380805	29 Deg.C	2 %
1781380201	29 Deg.C	2 %
1781379606	28 Deg.C	2 %
1781379001	28 Deg.C	2 %
1781378401	29 Deg.C	2 %
1781377806	29 Deg.C	2 %
1781377202	29 Deg.C	2 %
1781376605	29 Deg.C	2 %
1781376002	29 Deg.C	2 %
1781375405	29 Deg.C	2 %
1781374802	29 Deg.C	2 %
1781374202	28 Deg.C	2 %
1781373605	29 Deg.C	2 %
1781373001	28 Deg.C	2 %
1781372406	29 Deg.C	2 %
1781371802	28 Deg.C	2 %
1781371206	28 Deg.C	2 %
1781370601	28 Deg.C	2 %

*Used Equation Coefficients:

CPU Temp: 0, 0.1, 0

CPU Usage: 0, 1, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)