SP7VCL-SQ Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP7VCL-SQ. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temperatura CPU*	Obciazenie CPU*
1776673204	40 Deg.C	3 %
1776672602	40 Deg.C	3 %
1776672005	40 Deg.C	3 %
1776671401	40 Deg.C	3 %
1776670802	40 Deg.C	3 %
1776670204	41 Deg.C	3 %
1776669602	40 Deg.C	3 %
1776669005	40 Deg.C	3 %
1776668402	41 Deg.C	3 %
1776667805	40 Deg.C	3 %
1776667201	40 Deg.C	3 %
1776666605	41 Deg.C	3 %
1776666001	40 Deg.C	3 %
1776665405	40 Deg.C	3 %
1776664801	40 Deg.C	3 %
1776664204	41 Deg.C	3 %
1776663602	40 Deg.C	3 %
1776663001	41 Deg.C	3 %
1776662405	40 Deg.C	3 %
1776661805	41 Deg.C	3 %
1776661205	41 Deg.C	3 %
1776660602	40 Deg.C	3 %
1776660005	40 Deg.C	3 %
1776658801	41 Deg.C	3 %
1776658205	40 Deg.C	3 %

*Used Equation Coefficients:

Temperatura CPU: 0, 0.1, 0

Obciazenie CPU: 0, 1, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)