SP5PLA-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP5PLA-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temperatura CPU*	Obciazenie CPU*
1772751601	66 Deg.C	2 %
1772751002	67 Deg.C	2 %
1772750404	65 Deg.C	2 %
1772749802	66 Deg.C	2 %
1772749205	66 Deg.C	2 %
1772748601	66 Deg.C	2 %
1772748005	65 Deg.C	2 %
1772747402	65 Deg.C	2 %
1772746802	66 Deg.C	2 %
1772746205	66 Deg.C	2 %
1772745601	67 Deg.C	2 %
1772745005	66 Deg.C	2 %
1772744401	65 Deg.C	2 %
1772743804	66 Deg.C	2 %
1772743202	67 Deg.C	2 %
1772742601	66 Deg.C	2 %
1772742005	67 Deg.C	2 %
1772741402	66 Deg.C	2 %
1772740805	68 Deg.C	2 %
1772740202	67 Deg.C	2 %
1772739605	67 Deg.C	2 %
1772739002	67 Deg.C	2 %
1772738402	66 Deg.C	2 %
1772737202	68 Deg.C	2 %
1772736605	68 Deg.C	2 %

*Used Equation Coefficients:

Temperatura CPU: 0, 0.1, 0

Obciazenie CPU: 0, 1, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)