YE3ESW-7 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YE3ESW-7. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp.*	Humidity*	Pressure*
1780832468	27 °C	28 %RH	1012 hPa
1780832438	27 °C	27 %RH	1012 hPa
1780832377	27 °C	27 %RH	1012 hPa
1780832348	27 °C	27 %RH	1012 hPa
1780832328	27 °C	26 %RH	1012 hPa
1780832279	27 °C	27 %RH	1012 hPa
1780832255	27 °C	27 %RH	1012 hPa
1780832214	27 °C	27 %RH	1012 hPa
1780832191	27 °C	26 %RH	1012 hPa
1780832167	27 °C	26 %RH	1012 hPa
1780832145	27 °C	26 %RH	1012 hPa
1780832123	27 °C	27 %RH	1012 hPa
1780832104	27 °C	27 %RH	1012 hPa
1780832082	27 °C	26 %RH	1012 hPa
1780832063	27 °C	26 %RH	1012 hPa
1780832032	28 °C	27 %RH	1012 hPa
1780832007	28 °C	26 %RH	1012 hPa
1780831983	28 °C	26 %RH	1012 hPa
1780831971	28 °C	26 %RH	1012 hPa
1780831924	28 °C	26 %RH	1012 hPa
1780831873	28 °C	26 %RH	1012 hPa
1780831839	28 °C	26 %RH	1012 hPa
1780831786	28 °C	27 %RH	1012 hPa
1780831761	28 °C	26 %RH	1012 hPa
1780831742	28 °C	26 %RH	1012 hPa

*Used Equation Coefficients:

Temp.: 0, 1, 0

Humidity: 0, 1, 0

Pressure: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)