TA1EKK-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA1EKK-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RSSI*	CPU*	Batarya%*
1784664722	-30 dBm	28 C	100
1784661366	-25 dBm	42 C	100
1784661066	-44 dBm	43 C	100
1784660766	-45 dBm	43 C	100
1784660466	-38 dBm	42 C	100
1784660166	-42 dBm	41 C	100
1784659866	-44 dBm	41 C	100
1784659567	-41 dBm	41 C	100
1784659266	-31 dBm	40 C	100
1784658966	-42 dBm	40 C	100
1784658666	-39 dBm	40 C	100
1784658367	-26 dBm	41 C	100
1784643134	-31 dBm	45 C	100
1784642834	-29 dBm	44 C	100
1784642534	-43 dBm	44 C	100
1784642234	-31 dBm	43 C	100
1784641934	-31 dBm	41 C	100
1784641634	-34 dBm	41 C	100
1784641334	-36 dBm	39 C	100
1784641034	-32 dBm	37 C	100
1784640735	-39 dBm	29 C	100
1784612588	-42 dBm	48 C	100
1784612287	-35 dBm	47 C	100
1784611987	-35 dBm	46 C	100
1784611687	-38 dBm	46 C	100

*Used Equation Coefficients:

RSSI: 0, 1, -100

CPU: 0, 1, 0

Batarya%: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)