IR5ZZU-7 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR5ZZU-7. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	V-Vhf*	I-Vhf*	V-Uhf*	I-Uhf*	Te*
1773308418	0 Volt	0 Amp	0 Volt	0 Amp	12 GrdC
1773307817	0 Volt	0 Amp	0 Volt	0 Amp	12 GrdC
1773307217	0 Volt	0 Amp	0 Volt	0 Amp	12 GrdC
1773306614	0 Volt	0 Amp	0 Volt	0 Amp	11 GrdC
1773306003	0 Volt	0 Amp	0 Volt	0 Amp	14 GrdC
1772960212	0 Volt	0 Amp	0 Volt	0 Amp	19 GrdC
1772883632	0 Volt	0 Amp	0 Volt	0 Amp	-50 GrdC
1772883030	13.7 Volt	3.2 Amp	13.4 Volt	2.3 Amp	-50 GrdC
1772881819	13.5 Volt	2.5 Amp	13.8 Volt	2.5 Amp	-50 GrdC
1772881557	13.5 Volt	1 Amp	13.8 Volt	3.2 Amp	19 GrdC
1772880962	13.7 Volt	1.4 Amp	13.6 Volt	1.1 Amp	19 GrdC
1772880362	13.5 Volt	2.4 Amp	14 Volt	1.6 Amp	19 GrdC
1772879756	13.2 Volt	3.3 Amp	13.4 Volt	3.7 Amp	18 GrdC
1772879162	13.3 Volt	3.9 Amp	14.1 Volt	3.3 Amp	18 GrdC
1772878558	13.7 Volt	3.8 Amp	13.4 Volt	1.2 Amp	18 GrdC
1772877955	13.7 Volt	3.1 Amp	14.1 Volt	1.5 Amp	18 GrdC
1772877355	13.3 Volt	2.1 Amp	13.4 Volt	3.7 Amp	18 GrdC
1772876755	13.2 Volt	1.2 Amp	14.1 Volt	3.4 Amp	18 GrdC
1772876155	13.5 Volt	1 Amp	13.4 Volt	1.2 Amp	18 GrdC
1772875554	13.7 Volt	1.3 Amp	14 Volt	1.4 Amp	18 GrdC
1772874960	13.6 Volt	2.2 Amp	13.6 Volt	3.6 Amp	18 GrdC
1772873754	13.3 Volt	3.9 Amp	13.7 Volt	1.3 Amp	18 GrdC
1772873160	13.7 Volt	3.8 Amp	13.7 Volt	1.3 Amp	18 GrdC
1772872544	13.5 Volt	2.5 Amp	13.8 Volt	2.5 Amp	18 GrdC
1772833170	13.4 Volt	3.9 Amp	14.1 Volt	3.7 Amp	9 GrdC

*Used Equation Coefficients:

V-Vhf: 0, 0.1, 0

I-Vhf: 0, 0.1, 0

V-Uhf: 0, 0.1, 0

I-Uhf: 0, 0.1, 0

Te: 0, 1, -50

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)