N1SWT-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N1SWT-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1784624228	404 Pkts	0 Pkts	269 Pkts	6 C
1784534223	352 Pkts	0 Pkts	200 Pkts	6 C
1784530626	375 Pkts	0 Pkts	228 Pkts	6 C
1784523423	218 Pkts	0 Pkts	157 Pkts	6 C
1784459134	192 Pkts	183 Pkts	165 Pkts	11 C
1784455533	181 Pkts	169 Pkts	144 Pkts	10 C
1784451933	213 Pkts	198 Pkts	169 Pkts	10 C
1784448333	228 Pkts	213 Pkts	154 Pkts	10 C
1784444734	204 Pkts	195 Pkts	135 Pkts	10 C
1784441136	241 Pkts	223 Pkts	158 Pkts	10 C
1784437535	151 Pkts	140 Pkts	121 Pkts	10 C
1784433933	215 Pkts	203 Pkts	149 Pkts	10 C
1784430334	75 Pkts	67 Pkts	28 Pkts	10 C
1784426733	47 Pkts	35 Pkts	10 Pkts	10 C
1784423135	42 Pkts	32 Pkts	17 Pkts	10 C
1784419534	37 Pkts	30 Pkts	10 Pkts	10 C
1784415935	46 Pkts	37 Pkts	17 Pkts	9 C
1784412334	58 Pkts	48 Pkts	28 Pkts	11 C
1784408733	50 Pkts	40 Pkts	21 Pkts	10 C
1784405133	61 Pkts	52 Pkts	34 Pkts	8 C
1784401533	102 Pkts	93 Pkts	74 Pkts	10 C
1784397934	76 Pkts	67 Pkts	42 Pkts	10 C
1784394333	47 Pkts	38 Pkts	23 Pkts	10 C
1784390733	223 Pkts	212 Pkts	155 Pkts	11 C
1784387135	245 Pkts	237 Pkts	188 Pkts	11 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)