HP2DFA-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HP2DFA-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Dg10m*
1765842134	14.69 Volt	160 Pkt	50 Pkt	69 Pcnt	68 Pkt
1765841534	14.69 Volt	160 Pkt	50 Pkt	70 Pcnt	68 Pkt
1765840934	14.69 Volt	160 Pkt	50 Pkt	68 Pcnt	68 Pkt
1765840334	14.69 Volt	170 Pkt	60 Pkt	67 Pcnt	68 Pkt
1765839735	14.69 Volt	190 Pkt	60 Pkt	67 Pcnt	68 Pkt
1765839135	14.69 Volt	210 Pkt	70 Pkt	69 Pcnt	68 Pkt
1765838535	14.69 Volt	230 Pkt	80 Pkt	67 Pcnt	68 Pkt
1765837935	14.69 Volt	230 Pkt	80 Pkt	67 Pcnt	68 Pkt
1765837335	14.69 Volt	230 Pkt	80 Pkt	67 Pcnt	68 Pkt
1765836735	14.69 Volt	210 Pkt	70 Pkt	66 Pcnt	68 Pkt
1765836135	14.69 Volt	180 Pkt	60 Pkt	63 Pcnt	68 Pkt
1765835535	14.38 Volt	160 Pkt	50 Pkt	61 Pcnt	68 Pkt
1765834935	14.69 Volt	150 Pkt	50 Pkt	60 Pcnt	68 Pkt
1765834335	14.69 Volt	140 Pkt	50 Pkt	61 Pcnt	68 Pkt
1765833735	14.69 Volt	140 Pkt	50 Pkt	60 Pcnt	68 Pkt
1765833135	14.69 Volt	130 Pkt	50 Pkt	57 Pcnt	68 Pkt
1765832535	14.69 Volt	130 Pkt	50 Pkt	60 Pcnt	68 Pkt
1765831935	14.69 Volt	140 Pkt	50 Pkt	58 Pcnt	68 Pkt
1765831335	14.69 Volt	140 Pkt	40 Pkt	56 Pcnt	68 Pkt
1765830735	14.69 Volt	150 Pkt	40 Pkt	53 Pcnt	68 Pkt
1765830135	14.69 Volt	140 Pkt	40 Pkt	53 Pcnt	68 Pkt
1765829535	14.69 Volt	140 Pkt	40 Pkt	54 Pcnt	68 Pkt
1765828935	14.69 Volt	130 Pkt	40 Pkt	53 Pcnt	68 Pkt
1765828335	14.69 Volt	120 Pkt	40 Pkt	55 Pcnt	68 Pkt
1765827735	14.14 Volt	120 Pkt	30 Pkt	57 Pcnt	68 Pkt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Dg10m: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)