PP1RK-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object PP1RK-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1781409202	13.35 Volt	0 Pkt	0 Pkt	100 Pcnt
1781407402	13.35 Volt	0 Pkt	0 Pkt	87 Pcnt
1781405602	13.35 Volt	0 Pkt	0 Pkt	75 Pcnt
1781403802	13.35 Volt	0 Pkt	0 Pkt	80 Pcnt
1781400202	13.35 Volt	0 Pkt	0 Pkt	100 Pcnt
1781398402	13.35 Volt	0 Pkt	0 Pkt	100 Pcnt
1781396602	13.35 Volt	0 Pkt	0 Pkt	100 Pcnt
1781394803	13.35 Volt	0 Pkt	0 Pkt	100 Pcnt
1781393003	13.35 Volt	0 Pkt	0 Pkt	100 Pcnt
1781391203	13.35 Volt	0 Pkt	0 Pkt	100 Pcnt
1781389403	13.35 Volt	0 Pkt	0 Pkt	100 Pcnt
1781387603	13.35 Volt	0 Pkt	0 Pkt	100 Pcnt
1781385803	13.35 Volt	0 Pkt	0 Pkt	100 Pcnt
1781384003	13.35 Volt	0 Pkt	0 Pkt	100 Pcnt
1781382203	13.35 Volt	0 Pkt	0 Pkt	80 Pcnt
1781380403	13.35 Volt	30 Pkt	10 Pkt	72 Pcnt
1781378603	13.35 Volt	30 Pkt	10 Pkt	75 Pcnt
1781376803	13.35 Volt	10 Pkt	0 Pkt	91 Pcnt
1781375003	13.35 Volt	0 Pkt	0 Pkt	70 Pcnt
1781373203	13.35 Volt	0 Pkt	0 Pkt	90 Pcnt
1781371403	13.35 Volt	0 Pkt	0 Pkt	75 Pcnt
1781369603	13.35 Volt	10 Pkt	0 Pkt	86 Pcnt
1781367803	13.35 Volt	30 Pkt	10 Pkt	75 Pcnt
1781366003	13.35 Volt	30 Pkt	10 Pkt	75 Pcnt
1781364203	13.35 Volt	0 Pkt	0 Pkt	87 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)