G7UHT-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object G7UHT-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1772795014	165 Pkts	133 Pkts	87 Pkts	-11 C
1772791416	179 Pkts	146 Pkts	78 Pkts	-11 C
1772787816	192 Pkts	158 Pkts	72 Pkts	-11 C
1772784214	174 Pkts	139 Pkts	69 Pkts	-11 C
1772780614	177 Pkts	139 Pkts	57 Pkts	-11 C
1772777017	168 Pkts	133 Pkts	65 Pkts	-11 C
1772773415	192 Pkts	158 Pkts	59 Pkts	-11 C
1772769814	231 Pkts	190 Pkts	62 Pkts	-11 C
1772766215	223 Pkts	189 Pkts	60 Pkts	-11 C
1772762616	218 Pkts	188 Pkts	57 Pkts	-11 C
1772759017	245 Pkts	209 Pkts	68 Pkts	-10 C
1772755416	259 Pkts	216 Pkts	59 Pkts	-10 C
1772751816	285 Pkts	261 Pkts	57 Pkts	-10 C
1772748214	340 Pkts	291 Pkts	70 Pkts	-9 C
1772744615	336 Pkts	294 Pkts	79 Pkts	-10 C
1772741014	261 Pkts	215 Pkts	59 Pkts	-11 C
1772737414	240 Pkts	203 Pkts	84 Pkts	-13 C
1772733813	163 Pkts	130 Pkts	57 Pkts	-10 C
1772730214	180 Pkts	150 Pkts	69 Pkts	-10 C
1772726615	185 Pkts	155 Pkts	89 Pkts	-10 C
1772723014	139 Pkts	113 Pkts	61 Pkts	-11 C
1772719413	141 Pkts	112 Pkts	62 Pkts	-11 C
1772715813	112 Pkts	89 Pkts	46 Pkts	-11 C
1772712213	131 Pkts	105 Pkts	56 Pkts	-11 C
1772708615	146 Pkts	119 Pkts	59 Pkts	-11 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)