BM4LUR-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object BM4LUR-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	ALL_PKTS_10M*	POS_PKTS_10M*	CTRL_PKTS_10M*
1784706650	23 cnt	22 cnt	1 cnt
1784706050	21 cnt	21 cnt	0 cnt
1784705471	20 cnt	19 cnt	1 cnt
1784704850	19 cnt	19 cnt	0 cnt
1784704250	22 cnt	22 cnt	0 cnt
1784703650	23 cnt	23 cnt	0 cnt
1784703050	24 cnt	22 cnt	2 cnt
1784702450	19 cnt	17 cnt	2 cnt
1784701850	26 cnt	26 cnt	0 cnt
1784701250	20 cnt	18 cnt	2 cnt
1784700650	29 cnt	28 cnt	1 cnt
1784700050	22 cnt	20 cnt	2 cnt
1784699450	23 cnt	21 cnt	2 cnt
1784698850	26 cnt	25 cnt	1 cnt
1784698250	22 cnt	20 cnt	2 cnt
1784697650	18 cnt	18 cnt	0 cnt
1784697050	23 cnt	22 cnt	1 cnt
1784696450	22 cnt	22 cnt	0 cnt
1784695850	23 cnt	21 cnt	2 cnt
1784695250	18 cnt	18 cnt	0 cnt
1784694650	22 cnt	21 cnt	1 cnt
1784694050	19 cnt	19 cnt	0 cnt
1784693450	20 cnt	20 cnt	0 cnt
1784692850	21 cnt	21 cnt	0 cnt
1784692250	15 cnt	14 cnt	1 cnt

*Used Equation Coefficients:

ALL_PKTS_10M: 0, 1, 0

FWD_APRS_10M: 0, 1, 0

POS_PKTS_10M: 0, 1, 0

MSG_PKTS_10M: 0, 1, 0

CTRL_PKTS_10M: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)