KG7OMB Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KG7OMB. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Internal_Temp*	Pressure*	Humidity*	Voltage*
1765681162	63.8 F	873.2 mPA	20.5 PCT	13.84 V
1765680263	63.7 F	873.1 mPA	20.5 PCT	13.84 V
1765679363	63.8 F	873.2 mPA	20.6 PCT	13.84 V
1765678462	63.8 F	872.8 mPA	20.6 PCT	13.84 V
1765677562	63.8 F	872.8 mPA	20.7 PCT	13.84 V
1765676662	63.8 F	873 mPA	20.7 PCT	13.84 V
1765675761	63.8 F	872.8 mPA	20.8 PCT	13.84 V
1765674862	63.9 F	872.7 mPA	20.8 PCT	13.84 V
1765673962	63.8 F	872.8 mPA	20.8 PCT	13.62 V
1765670360	63.9 F	873.1 mPA	21 PCT	13.84 V
1765669460	63.9 F	873.1 mPA	21 PCT	13.84 V
1765667660	63.8 F	872.8 mPA	21.1 PCT	13.84 V
1765666760	63.7 F	872.7 mPA	21.1 PCT	13.62 V
1765665859	63.7 F	872.4 mPA	21.1 PCT	13.84 V
1765664959	63.6 F	872.4 mPA	21.2 PCT	13.84 V
1765664059	63.5 F	872.8 mPA	21.1 PCT	13.84 V
1765663158	63.6 F	872.6 mPA	21.1 PCT	13.84 V
1765662271	63.4 F	872.4 mPA	21.1 PCT	13.84 V
1765660459	63.4 F	872.3 mPA	21.1 PCT	13.84 V
1765659559	63.5 F	872.4 mPA	21.2 PCT	13.84 V
1765658658	63.3 F	871.9 mPA	21.1 PCT	13.84 V
1765657758	63.2 F	871.9 mPA	21.1 PCT	13.84 V
1765656858	63.3 F	871.9 mPA	21.2 PCT	13.84 V
1765655058	63.4 F	871.7 mPA	21.1 PCT	13.84 V
1765654157	63.5 F	871.8 mPA	21.2 PCT	13.84 V

*Used Equation Coefficients:

Internal_Temp: 0, 1, 0

Pressure: 0, 1, 0

Humidity: 0, 1, 0

Voltage: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)