R7HJ-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object R7HJ-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*	V_Bat*	V_Ext*
1773257034	289 Count	0 Count	0 Count	0 VDC	0 VDC
1773256431	288 Count	0 Count	0 Count	0 VDC	0 VDC
1773255827	287 Count	0 Count	0 Count	0 VDC	0 VDC
1773255223	286 Count	0 Count	0 Count	0 VDC	0 VDC
1773254619	285 Count	0 Count	0 Count	0 VDC	0 VDC
1773254015	284 Count	0 Count	0 Count	0 VDC	0 VDC
1773253411	283 Count	0 Count	0 Count	0 VDC	0 VDC
1773252807	282 Count	0 Count	0 Count	0 VDC	0 VDC
1773252203	281 Count	0 Count	0 Count	0 VDC	0 VDC
1773251599	280 Count	0 Count	0 Count	0 VDC	0 VDC
1773250995	279 Count	0 Count	0 Count	0 VDC	0 VDC
1773250391	278 Count	0 Count	0 Count	0 VDC	0 VDC
1773249787	277 Count	0 Count	0 Count	0 VDC	0 VDC
1773249183	276 Count	0 Count	0 Count	0 VDC	0 VDC
1773248579	275 Count	0 Count	0 Count	0 VDC	0 VDC
1773247975	274 Count	0 Count	0 Count	0 VDC	0 VDC
1773247371	273 Count	0 Count	0 Count	0 VDC	0 VDC
1773246767	272 Count	0 Count	0 Count	0 VDC	0 VDC
1773246163	271 Count	0 Count	0 Count	0 VDC	0 VDC
1773245559	270 Count	0 Count	0 Count	0 VDC	0 VDC
1773244955	269 Count	0 Count	0 Count	0 VDC	0 VDC
1773244351	268 Count	0 Count	0 Count	0 VDC	0 VDC
1773243747	267 Count	0 Count	0 Count	0 VDC	0 VDC
1773243143	266 Count	0 Count	0 Count	0 VDC	0 VDC
1773242539	265 Count	0 Count	0 Count	0 VDC	0 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)