TA4ALA-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA4ALA-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	RSSI*	Voltage*
1773242470	31 Pkt	-39 dBm	13.95 V
1773241544	28 Pkt	-36 dBm	13.95 V
1773240619	33 Pkt	-35 dBm	13.97 V
1773239694	33 Pkt	-35 dBm	13.97 V
1773238769	27 Pkt	-36 dBm	13.97 V
1773237844	34 Pkt	-36 dBm	13.97 V
1773236919	26 Pkt	-36 dBm	13.95 V
1773235994	32 Pkt	-38 dBm	13.97 V
1773235069	25 Pkt	-36 dBm	13.95 V
1773234144	33 Pkt	-36 dBm	13.97 V
1773233218	29 Pkt	-37 dBm	13.97 V
1773231369	24 Pkt	-38 dBm	13.95 V
1773230444	30 Pkt	-40 dBm	13.95 V
1773229519	26 Pkt	-38 dBm	13.97 V
1773228595	28 Pkt	-38 dBm	13.97 V
1773227670	23 Pkt	-38 dBm	13.95 V
1773226745	29 Pkt	-38 dBm	13.95 V
1773225820	25 Pkt	-36 dBm	13.95 V
1773224895	25 Pkt	-38 dBm	13.95 V
1773223971	21 Pkt	-40 dBm	13.95 V
1773223045	27 Pkt	-38 dBm	13.97 V
1773222121	22 Pkt	-37 dBm	13.97 V
1773221195	22 Pkt	-36 dBm	13.95 V
1773220271	32 Pkt	-39 dBm	13.97 V
1773219345	23 Pkt	-37 dBm	13.95 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)