YE2YE-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YE2YE-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp.*	Humidity*	Pressure*
1777088567	41 °C	17 %RH	999 hPa
1777086682	41 °C	16 %RH	1000 hPa
1777084797	40 °C	15 %RH	1000 hPa
1777082912	40 °C	14 %RH	1000 hPa
1777081027	40 °C	13 %RH	1000 hPa
1777079143	40 °C	14 %RH	1000 hPa
1777077257	40 °C	14 %RH	1000 hPa
1777075372	41 °C	15 %RH	1000 hPa
1777073488	40 °C	15 %RH	1000 hPa
1777071603	40 °C	15 %RH	1000 hPa
1777069718	41 °C	15 %RH	999 hPa
1777067833	40 °C	15 %RH	999 hPa
1777065948	41 °C	15 %RH	999 hPa
1777064063	41 °C	15 %RH	998 hPa
1777060293	41 °C	15 %RH	998 hPa
1777058408	41 °C	16 %RH	998 hPa
1777056527	41 °C	16 %RH	998 hPa
1777054638	41 °C	15 %RH	999 hPa
1777052753	41 °C	16 %RH	998 hPa
1777050868	41 °C	16 %RH	998 hPa
1777048983	41 °C	16 %RH	999 hPa
1777047098	41 °C	15 %RH	999 hPa
1777045217	41 °C	16 %RH	999 hPa
1777041443	41 °C	15 %RH	999 hPa
1777039562	41 °C	16 %RH	999 hPa

*Used Equation Coefficients:

Temp.: 0, 1, 0

Humidity: 0, 1, 0

Pressure: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)