KF5MIL-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KF5MIL-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	V2*	RFiGate*	InetIn*	InetiGate*
1784668237	13.4 V	8 Pkts	5 Pkts	0 Pkts
1784666437	13.5 V	20 Pkts	7 Pkts	0 Pkts
1784664637	15.3 V	20 Pkts	5 Pkts	0 Pkts
1784662837	14.9 V	28 Pkts	7 Pkts	0 Pkts
1784661037	13.9 V	19 Pkts	5 Pkts	0 Pkts
1784659237	13.6 V	42 Pkts	13 Pkts	6 Pkts
1784657437	13.4 V	15 Pkts	5 Pkts	0 Pkts
1784655637	13.2 V	25 Pkts	7 Pkts	0 Pkts
1784653837	13.1 V	35 Pkts	5 Pkts	0 Pkts
1784652037	12.9 V	32 Pkts	7 Pkts	0 Pkts
1784650237	12.6 V	10 Pkts	6 Pkts	0 Pkts
1784648437	12.5 V	8 Pkts	30 Pkts	0 Pkts
1784646637	12.5 V	76 Pkts	23 Pkts	0 Pkts
1784644837	12.5 V	381 Pkts	39 Pkts	0 Pkts
1784643037	12.5 V	334 Pkts	30 Pkts	0 Pkts
1784641237	12.6 V	187 Pkts	51 Pkts	0 Pkts
1784639437	12.6 V	162 Pkts	32 Pkts	0 Pkts
1784637637	12.6 V	138 Pkts	66 Pkts	0 Pkts
1784635837	12.6 V	45 Pkts	26 Pkts	0 Pkts
1784634037	12.6 V	29 Pkts	17 Pkts	0 Pkts
1784632237	12.6 V	31 Pkts	13 Pkts	0 Pkts
1784630437	12.6 V	28 Pkts	32 Pkts	0 Pkts
1784628637	12.7 V	31 Pkts	11 Pkts	0 Pkts
1784626837	12.7 V	31 Pkts	21 Pkts	0 Pkts
1784625037	12.7 V	30 Pkts	13 Pkts	0 Pkts

*Used Equation Coefficients:

V2: 0, 0.1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

InetIn: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)