Overview Statistics Trail Chart Weather Telemetry Raw packets
 

This is the latest recevied telemetry packets stored in our database for station/object YB0RWN-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>
Time Temperatu* Humidity* Pressure* Satellite* Value5*
1772445354 33 °C 56 %RH 1007 hPa 10 Sat 0
1772445345 33 °C 56 %RH 1007 hPa 10 Sat 0
1772444775 31 °C 60 %RH 1007 hPa 7 Sat 0
1772444735 31 °C 61 %RH 1007 hPa 0 Sat 0
1772444725 31 °C 61 %RH 1007 hPa 7 Sat 0
1772444691 30 °C 62 %RH 1007 hPa 8 Sat 0
1772444611 30 °C 63 %RH 1007 hPa 7 Sat 0
1772444561 29 °C 64 %RH 1007 hPa 7 Sat 0
1772444552 29 °C 64 %RH 1007 hPa 7 Sat 0
1772444448 28 °C 66 %RH 1007 hPa 7 Sat 0
1772444380 28 °C 67 %RH 1007 hPa 5 Sat 0
1772361365 34 °C 43 %RH 1005 hPa 12 Sat 0
1772361338 34 °C 43 %RH 1005 hPa 12 Sat 0
1772361330 34 °C 44 %RH 1005 hPa 12 Sat 0
1772361317 34 °C 46 %RH 1005 hPa 12 Sat 0
1772361308 34 °C 47 %RH 1005 hPa 12 Sat 0
1772361300 34 °C 49 %RH 1005 hPa 12 Sat 0
1772360857 34 °C 50 %RH 1004 hPa 12 Sat 0
1772360842 34 °C 52 %RH 1004 hPa 12 Sat 0
1772360630 32 °C 57 %RH 1004 hPa 8 Sat 0
1772360613 32 °C 60 %RH 1004 hPa 9 Sat 0
1772360579 32 °C 58 %RH 1004 hPa 10 Sat 0
1772360367 30 °C 61 %RH 1004 hPa 11 Sat 0
1772360237 30 °C 61 %RH 1004 hPa 5 Sat 0
1772357723 37 °C 45 %RH 1004 hPa 9 Sat 0
*Used Equation Coefficients:
Temperatu: 0, 1, 0
Humidity: 0, 1, 0
Pressure: 0, 1, 0
Satellite: 0, 1, 0
Value5: 0, 1, 0

  • The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
  • Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
    The sent equation coefficients is used in the equation: a * value2 + b * value + c.
  • The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
  • The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
  • All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
  • A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)