YD2CFW-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YD2CFW-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*	V_Bat*	V_Ext*
1777589118	0 Count	809 Count	0 Count	0 VDC	0 VDC
1777587318	0 Count	803 Count	0 Count	0 VDC	0 VDC
1777585518	0 Count	794 Count	0 Count	0 VDC	0 VDC
1777583718	0 Count	786 Count	0 Count	0 VDC	0 VDC
1777581918	0 Count	778 Count	0 Count	0 VDC	0 VDC
1777580118	0 Count	771 Count	0 Count	0 VDC	0 VDC
1777578318	0 Count	762 Count	0 Count	0 VDC	0 VDC
1777576518	0 Count	756 Count	0 Count	0 VDC	0 VDC
1777574718	0 Count	747 Count	0 Count	0 VDC	0 VDC
1777572918	0 Count	741 Count	0 Count	0 VDC	0 VDC
1777571118	0 Count	734 Count	0 Count	0 VDC	0 VDC
1777569318	0 Count	726 Count	0 Count	0 VDC	0 VDC
1777567518	0 Count	719 Count	0 Count	0 VDC	0 VDC
1777565718	0 Count	714 Count	0 Count	0 VDC	0 VDC
1777563917	0 Count	708 Count	0 Count	0 VDC	0 VDC
1777562117	0 Count	700 Count	0 Count	0 VDC	0 VDC
1777560317	0 Count	694 Count	0 Count	0 VDC	0 VDC
1777558517	0 Count	685 Count	0 Count	0 VDC	0 VDC
1777556717	0 Count	673 Count	0 Count	0 VDC	0 VDC
1777554917	0 Count	664 Count	0 Count	0 VDC	0 VDC
1777553117	0 Count	657 Count	0 Count	0 VDC	0 VDC
1777551317	0 Count	645 Count	0 Count	0 VDC	0 VDC
1777549517	0 Count	638 Count	0 Count	0 VDC	0 VDC
1777547717	0 Count	633 Count	0 Count	0 VDC	0 VDC
1777545920	0 Count	626 Count	0 Count	0 VDC	0 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)