ED6YAE-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ED6YAE-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	DC*	RxP-1h*	Dg1h*	Eff1h*
1761520085	10.5 Volt	370 Pkt	280 Pkt	93 *100
1761519785	10.43 Volt	370 Pkt	270 Pkt	93 *100
1761519485	10.58 Volt	370 Pkt	270 Pkt	94 *100
1761519185	10.5 Volt	370 Pkt	270 Pkt	94 *100
1761518885	10.5 Volt	370 Pkt	270 Pkt	95 *100
1761518585	10.5 Volt	370 Pkt	270 Pkt	95 *100
1761518285	10.43 Volt	360 Pkt	270 Pkt	95 *100
1761517985	10.5 Volt	370 Pkt	280 Pkt	96 *100
1761517385	10.5 Volt	360 Pkt	270 Pkt	96 *100
1761517085	10.5 Volt	360 Pkt	270 Pkt	95 *100
1761516785	10.43 Volt	350 Pkt	270 Pkt	95 *100
1761516485	10.43 Volt	360 Pkt	280 Pkt	96 *100
1761516185	10.5 Volt	360 Pkt	280 Pkt	95 *100
1761515885	10.5 Volt	360 Pkt	280 Pkt	94 *100
1761515585	10.5 Volt	360 Pkt	280 Pkt	93 *100
1761515285	10.5 Volt	370 Pkt	280 Pkt	92 *100
1761514985	10.5 Volt	370 Pkt	290 Pkt	93 *100
1761514685	10.5 Volt	370 Pkt	290 Pkt	92 *100
1761514385	10.5 Volt	380 Pkt	290 Pkt	92 *100
1761514085	10.5 Volt	370 Pkt	290 Pkt	93 *100
1761513785	10.5 Volt	390 Pkt	290 Pkt	92 *100
1761513485	10.5 Volt	390 Pkt	290 Pkt	92 *100
1761513185	10.5 Volt	390 Pkt	300 Pkt	92 *100
1761512885	10.5 Volt	390 Pkt	300 Pkt	92 *100
1761512585	10.5 Volt	400 Pkt	300 Pkt	91 *100

*Used Equation Coefficients:

DC: 0, 0.075, 0

RxP-1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

DC-1: 0, 0.075, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)