DB0IK-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB0IK-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	Hum*	eGAS*	Temp.out*
1773151371	954.2 hPa	27.1 C deg	28.5 %	2071 -	0 C deg
1773151371	954.2 hPa	27.1 C deg	28.5 %	2071 -	0 C deg
1773149540	954.2 hPa	27 C deg	28.5 %	2065 -	0 C deg
1773149540	954.2 hPa	27 C deg	28.5 %	2065 -	0 C deg
1773147693	954.4 hPa	27.8 C deg	29.5 %	1813 -	0 C deg
1773145906	954.6 hPa	26.9 C deg	29.7 %	1953 -	0 C deg
1773145906	954.6 hPa	26.9 C deg	29.7 %	1953 -	0 C deg
1773144060	954.8 hPa	27.1 C deg	30.3 %	1856 -	0 C deg
1773144060	954.8 hPa	27.1 C deg	30.3 %	1856 -	0 C deg
1773140436	955.4 hPa	25.2 C deg	33.6 %	1531 -	0 C deg
1773140436	955.4 hPa	25.2 C deg	33.6 %	1531 -	0 C deg
1773138652	955.4 hPa	24.4 C deg	35.9 %	1290 -	0 C deg
1773138639	955.4 hPa	24.4 C deg	35.9 %	1290 -	0 C deg
1773136820	955.5 hPa	22.7 C deg	38.5 %	1209 -	0 C deg
1773135019	955.5 hPa	21.3 C deg	40.8 %	1153 -	0 C deg
1773133184	955.4 hPa	20.4 C deg	43.7 %	922 -	0 C deg
1773133178	955.4 hPa	20.4 C deg	43.7 %	922 -	0 C deg
1773131377	955.5 hPa	19 C deg	45.9 %	883 -	0 C deg
1773131370	955.5 hPa	19 C deg	45.9 %	883 -	0 C deg
1773129551	955.4 hPa	17.1 C deg	49.3 %	838 -	0 C deg
1773129549	955.4 hPa	17.1 C deg	49.3 %	838 -	0 C deg
1773127743	955.3 hPa	15.5 C deg	52.6 %	779 -	0 C deg
1773127736	955.3 hPa	15.5 C deg	52.6 %	779 -	0 C deg
1773125988	955.2 hPa	13.9 C deg	56 %	696 -	0 C deg
1773125964	955.2 hPa	13.9 C deg	56 %	696 -	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

eGAS: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)