YB1LZ-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YB1LZ-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp.*	Humidity*	Pressure*
1789941575	26 C	38 %RH	796 hPa
1789939675	26 C	37 %RH	796 hPa
1789937775	26 C	37 %RH	796 hPa
1789935875	26 C	38 %RH	796 hPa
1789933975	26 C	38 %RH	796 hPa
1789932075	26 C	38 %RH	796 hPa
1789930175	26 C	38 %RH	796 hPa
1789928275	26 C	39 %RH	797 hPa
1789926375	26 C	39 %RH	797 hPa
1789924475	27 C	39 %RH	797 hPa
1789922575	27 C	40 %RH	798 hPa
1789920675	27 C	41 %RH	798 hPa
1789918775	27 C	42 %RH	798 hPa
1789916875	27 C	42 %RH	798 hPa
1789914975	27 C	42 %RH	798 hPa
1789913075	27 C	42 %RH	798 hPa
1789911175	27 C	41 %RH	798 hPa
1789910261	27 C	42 %RH	798 hPa
1789908361	27 C	41 %RH	798 hPa
1789906461	27 C	41 %RH	797 hPa
1789904561	27 C	41 %RH	797 hPa
1789902661	27 C	41 %RH	797 hPa
1789900761	27 C	41 %RH	797 hPa
1789898861	28 C	40 %RH	796 hPa
1789896961	28 C	40 %RH	796 hPa

*Used Equation Coefficients:

Temp.: 0, 1, 0

Humidity: 0, 1, 0

Pressure: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)