YO2LIQ-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YO2LIQ-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1777595125	13.19 Volt	340 Pkt	80 Pkt	97 Pcnt
1777594525	13.19 Volt	340 Pkt	80 Pkt	97 Pcnt
1777593925	13.27 Volt	330 Pkt	80 Pkt	96 Pcnt
1777593325	13.19 Volt	330 Pkt	80 Pkt	97 Pcnt
1777592725	13.19 Volt	330 Pkt	80 Pkt	97 Pcnt
1777592125	13.27 Volt	350 Pkt	80 Pkt	96 Pcnt
1777591525	13.27 Volt	350 Pkt	80 Pkt	96 Pcnt
1777590925	13.19 Volt	350 Pkt	70 Pkt	96 Pcnt
1777590325	13.27 Volt	350 Pkt	70 Pkt	97 Pcnt
1777589725	13.19 Volt	340 Pkt	70 Pkt	97 Pcnt
1777589125	13.19 Volt	340 Pkt	70 Pkt	97 Pcnt
1777588525	13.19 Volt	320 Pkt	70 Pkt	98 Pcnt
1777587925	13.19 Volt	320 Pkt	70 Pkt	98 Pcnt
1777587325	13.19 Volt	300 Pkt	80 Pkt	97 Pcnt
1777586725	13.19 Volt	290 Pkt	80 Pkt	97 Pcnt
1777586125	13.19 Volt	290 Pkt	80 Pkt	96 Pcnt
1777585525	13.19 Volt	300 Pkt	80 Pkt	97 Pcnt
1777584925	13.19 Volt	290 Pkt	80 Pkt	97 Pcnt
1777584325	13.19 Volt	300 Pkt	80 Pkt	97 Pcnt
1777583725	13.19 Volt	300 Pkt	80 Pkt	96 Pcnt
1777583125	13.19 Volt	300 Pkt	80 Pkt	96 Pcnt
1777582525	13.19 Volt	300 Pkt	80 Pkt	97 Pcnt
1777581925	13.19 Volt	300 Pkt	80 Pkt	97 Pcnt
1777581325	13.19 Volt	300 Pkt	80 Pkt	96 Pcnt
1777580725	13.19 Volt	320 Pkt	80 Pkt	96 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)