YE2YE-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YE2YE-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Temp.*	Humidity*	Pressure*
1777570996	29 °C	39 %RH	815 hPa
1777569006	29 °C	40 %RH	816 hPa
1777567016	29 °C	39 %RH	816 hPa
1777565026	29 °C	39 %RH	816 hPa
1777563036	30 °C	39 %RH	816 hPa
1777561046	30 °C	39 %RH	816 hPa
1777559056	30 °C	39 %RH	816 hPa
1777557066	30 °C	39 %RH	816 hPa
1777555076	30 °C	39 %RH	816 hPa
1777553086	30 °C	40 %RH	816 hPa
1777551096	30 °C	40 %RH	815 hPa
1777549106	30 °C	40 %RH	814 hPa
1777547116	30 °C	39 %RH	814 hPa
1777545126	30 °C	39 %RH	814 hPa
1777543136	30 °C	39 %RH	814 hPa
1777541146	31 °C	39 %RH	814 hPa
1777539156	31 °C	39 %RH	813 hPa
1777537166	31 °C	40 %RH	813 hPa
1777535176	31 °C	40 %RH	813 hPa
1777533186	31 °C	40 %RH	813 hPa
1777531196	31 °C	39 %RH	813 hPa
1777529206	31 °C	39 %RH	813 hPa
1777527216	32 °C	41 %RH	814 hPa
1777525226	31 °C	43 %RH	814 hPa
1777523235	31 °C	43 %RH	815 hPa

*Used Equation Coefficients:

Temp.: 0, 1, 0

Humidity: 0, 1, 0

Pressure: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)