OK0DV Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OK0DV. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	CPU Temp*	TX TRX Temp*	IN Temp*	IN Humidity*	OUT Temp*
1773774237	26 deg.C	33 deg.C	6 deg.C	71 %	3 deg.C
1773773937	27 deg.C	34 deg.C	9 deg.C	61 %	4 deg.C
1773773637	27 deg.C	45 deg.C	8 deg.C	65 %	4 deg.C
1773773337	27 deg.C	36 deg.C	10 deg.C	59 %	3 deg.C
1773773037	24 deg.C	46 deg.C	5 deg.C	75 %	3 deg.C
1773772737	24 deg.C	36 deg.C	5 deg.C	74 %	3 deg.C
1773772437	24 deg.C	25 deg.C	5 deg.C	73 %	3 deg.C
1773772137	25 deg.C	21 deg.C	5 deg.C	74 %	3 deg.C
1773771837	24 deg.C	21 deg.C	5 deg.C	74 %	3 deg.C
1773771537	24 deg.C	22 deg.C	5 deg.C	74 %	3 deg.C
1773771237	24 deg.C	23 deg.C	5 deg.C	74 %	3 deg.C
1773770937	24 deg.C	22 deg.C	5 deg.C	74 %	3 deg.C
1773770637	24 deg.C	23 deg.C	5 deg.C	75 %	3 deg.C
1773770337	24 deg.C	23 deg.C	5 deg.C	75 %	3 deg.C
1773770037	25 deg.C	24 deg.C	5 deg.C	75 %	3 deg.C
1773769737	24 deg.C	24 deg.C	5 deg.C	75 %	3 deg.C
1773769437	25 deg.C	24 deg.C	5 deg.C	75 %	3 deg.C
1773769137	25 deg.C	25 deg.C	5 deg.C	76 %	4 deg.C
1773768837	26 deg.C	26 deg.C	5 deg.C	76 %	4 deg.C
1773768537	26 deg.C	28 deg.C	6 deg.C	76 %	4 deg.C
1773768237	26 deg.C	29 deg.C	6 deg.C	76 %	4 deg.C
1773767937	26 deg.C	30 deg.C	6 deg.C	74 %	4 deg.C
1773767638	28 deg.C	32 deg.C	8 deg.C	68 %	4 deg.C
1773767338	28 deg.C	33 deg.C	12 deg.C	58 %	4 deg.C
1773767037	27 deg.C	46 deg.C	8 deg.C	68 %	4 deg.C

*Used Equation Coefficients:

CPU Temp: 0, 0.5, -25

TX TRX Temp: 0, 0.5, -25

IN Temp: 0, 0.5, -25

IN Humidity: 0, 0.5, -25

OUT Temp: 0, 0.5, -25

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)