IQ5ARI-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IQ5ARI-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	Hum*	QNH*	Temp.out*
1784695314	908.7 hPa	15.2 C deg	93 %	1020.2 hPa	0 C deg
1784693508	908.6 hPa	14.7 C deg	97.2 %	1020.3 hPa	0 C deg
1784691669	908.5 hPa	14.2 C deg	100 %	1020.4 hPa	0 C deg
1784689858	908.5 hPa	14.4 C deg	98.3 %	1020.3 hPa	0 C deg
1784688040	908.5 hPa	14.2 C deg	98.6 %	1020.4 hPa	0 C deg
1784686239	908.6 hPa	14.4 C deg	94.3 %	1020.4 hPa	0 C deg
1784684400	908.6 hPa	14.6 C deg	90.2 %	1020.3 hPa	0 C deg
1784682586	908.7 hPa	14.6 C deg	87.9 %	1020.4 hPa	0 C deg
1784680772	908.4 hPa	13.1 C deg	100 %	1020.7 hPa	0 C deg
1784678956	908.7 hPa	13.3 C deg	100 %	1021 hPa	0 C deg
1784677139	908.9 hPa	13.2 C deg	100 %	1021.3 hPa	0 C deg
1784675323	908.9 hPa	13.1 C deg	100 %	1021.3 hPa	0 C deg
1784673534	908.7 hPa	13.2 C deg	100 %	1021 hPa	0 C deg
1784671765	909.3 hPa	12.4 C deg	100 %	1022 hPa	0 C deg
1784669878	907.9 hPa	15 C deg	96.4 %	1019.4 hPa	0 C deg
1784668069	908.5 hPa	15.5 C deg	100 %	1019.8 hPa	0 C deg
1784666250	908.3 hPa	17.9 C deg	100 %	1018.7 hPa	0 C deg
1784664456	908.5 hPa	19 C deg	91.9 %	1018.5 hPa	0 C deg
1784662621	908.6 hPa	20.2 C deg	87 %	1018 hPa	0 C deg
1784660802	908.4 hPa	23.2 C deg	57.3 %	1016.7 hPa	0 C deg
1784659010	908 hPa	23.7 C deg	57.2 %	1016 hPa	0 C deg
1784657203	907.4 hPa	24.8 C deg	55.6 %	1014.9 hPa	0 C deg
1784655370	907.3 hPa	26.3 C deg	52.5 %	1014.3 hPa	0 C deg
1784653574	907.1 hPa	29.6 C deg	50.6 %	1012.7 hPa	0 C deg
1784651730	907 hPa	31.8 C deg	43 %	1011.9 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)