IQ0WXK-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IQ0WXK-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	Hum*	eGAS*	Temp.out*
1780541146	967.4 hPa	21.9 C deg	70.3 %	98 -	0 C deg
1780541140	967.4 hPa	21.9 C deg	70.3 %	98 -	0 C deg
1780539325	967.5 hPa	21.8 C deg	70.8 %	98 -	0 C deg
1780537516	967.4 hPa	22.4 C deg	69.8 %	88 -	0 C deg
1780537510	967.4 hPa	22.4 C deg	69.8 %	88 -	0 C deg
1780535700	967.3 hPa	22.9 C deg	70.1 %	84 -	0 C deg
1780533885	967.7 hPa	22.4 C deg	72.6 %	97 -	0 C deg
1780532083	967.7 hPa	22.3 C deg	72.5 %	107 -	0 C deg
1780530248	967.8 hPa	22.4 C deg	71.8 %	111 -	0 C deg
1780528446	967.7 hPa	23.2 C deg	69.7 %	92 -	0 C deg
1780527103	967.9 hPa	22.5 C deg	70.9 %	116 -	0 C deg
1780525281	967.7 hPa	22.7 C deg	71 %	128 -	0 C deg
1780525281	967.7 hPa	22.7 C deg	71 %	128 -	0 C deg
1780523462	967.6 hPa	22.6 C deg	71.4 %	127 -	0 C deg
1780521640	967.5 hPa	22.8 C deg	70.7 %	132 -	0 C deg
1780519833	967.5 hPa	22.9 C deg	70.5 %	140 -	0 C deg
1780519830	967.5 hPa	22.9 C deg	70.5 %	140 -	0 C deg
1780518034	967.3 hPa	23.1 C deg	68.9 %	147 -	0 C deg
1780512572	966.2 hPa	24 C deg	60.8 %	212 -	0 C deg
1780512564	966.2 hPa	24 C deg	60.8 %	212 -	0 C deg
1780501696	965.2 hPa	27.4 C deg	50.7 %	426 -	0 C deg
1780499867	965.2 hPa	27.9 C deg	49.7 %	447 -	0 C deg
1780499866	965.2 hPa	27.9 C deg	49.7 %	447 -	0 C deg
1780498051	965.2 hPa	27.4 C deg	54.2 %	370 -	0 C deg
1780496234	965 hPa	25.8 C deg	63.3 %	230 -	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

eGAS: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)