YB1LZ-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YB1LZ-9. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp.*	Humidity*	Pressure*
1781761171	37 °C	25 %RH	936 hPa
1781759514	36 °C	28 %RH	937 hPa
1781757857	36 °C	30 %RH	937 hPa
1781756200	36 °C	30 %RH	937 hPa
1781754543	35 °C	31 %RH	938 hPa
1781752886	35 °C	32 %RH	938 hPa
1781751229	34 °C	33 %RH	938 hPa
1781749586	33 °C	36 %RH	939 hPa
1781747915	32 °C	37 %RH	939 hPa
1781746257	31 °C	40 %RH	939 hPa
1781744601	30 °C	43 %RH	939 hPa
1781742943	29 °C	44 %RH	939 hPa
1781741287	29 °C	45 %RH	938 hPa
1781739630	28 °C	46 %RH	938 hPa
1781737972	28 °C	46 %RH	938 hPa
1781736315	28 °C	46 %RH	938 hPa
1781734658	28 °C	47 %RH	938 hPa
1781733001	28 °C	48 %RH	938 hPa
1781731344	28 °C	47 %RH	938 hPa
1781729687	28 °C	48 %RH	938 hPa
1781728030	28 °C	48 %RH	938 hPa
1781726373	29 °C	47 %RH	938 hPa
1781724716	29 °C	47 %RH	938 hPa
1781723059	29 °C	46 %RH	938 hPa
1781721402	29 °C	47 %RH	938 hPa

*Used Equation Coefficients:

Temp.: 0, 1, 0

Humidity: 0, 1, 0

Pressure: 0, 1, 0

AllCount: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)