SUNLGT Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SUNLGT. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1757478241	13.59 Volt	430 Pkt	50 Pkt	70 Pcnt
1757478240	13.59 Volt	430 Pkt	50 Pkt	70 Pcnt
1757477641	13.59 Volt	420 Pkt	60 Pkt	69 Pcnt
1757477640	13.59 Volt	420 Pkt	60 Pkt	69 Pcnt
1757477041	13.59 Volt	420 Pkt	60 Pkt	69 Pcnt
1757477040	13.59 Volt	420 Pkt	60 Pkt	69 Pcnt
1757476441	13.59 Volt	420 Pkt	60 Pkt	69 Pcnt
1757476440	13.59 Volt	420 Pkt	60 Pkt	69 Pcnt
1757475841	13.59 Volt	420 Pkt	60 Pkt	68 Pcnt
1757475841	13.59 Volt	420 Pkt	60 Pkt	68 Pcnt
1757475242	13.59 Volt	420 Pkt	60 Pkt	68 Pcnt
1757475241	13.59 Volt	420 Pkt	60 Pkt	68 Pcnt
1757474642	13.75 Volt	440 Pkt	60 Pkt	68 Pcnt
1757474641	13.75 Volt	440 Pkt	60 Pkt	68 Pcnt
1757474041	13.59 Volt	440 Pkt	60 Pkt	68 Pcnt
1757474041	13.59 Volt	440 Pkt	60 Pkt	68 Pcnt
1757473441	13.59 Volt	430 Pkt	60 Pkt	66 Pcnt
1757473441	13.59 Volt	430 Pkt	60 Pkt	66 Pcnt
1757472841	13.59 Volt	440 Pkt	60 Pkt	65 Pcnt
1757472841	13.59 Volt	440 Pkt	60 Pkt	65 Pcnt
1757472241	13.59 Volt	440 Pkt	50 Pkt	64 Pcnt
1757472241	13.59 Volt	440 Pkt	50 Pkt	64 Pcnt
1757471641	13.59 Volt	440 Pkt	50 Pkt	62 Pcnt
1757471041	13.59 Volt	440 Pkt	50 Pkt	60 Pcnt
1757471041	13.59 Volt	440 Pkt	50 Pkt	60 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)