VK3RGR-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK3RGR-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1788602450	13.95 Volt	210 Pkt	40 PTT	85 Pcnt
1788598846	13.95 Volt	190 Pkt	50 PTT	76 Pcnt
1788595243	13.95 Volt	190 Pkt	50 PTT	79 Pcnt
1788591640	13.95 Volt	190 Pkt	50 PTT	88 Pcnt
1788588036	13.95 Volt	210 Pkt	50 PTT	89 Pcnt
1788584433	13.95 Volt	190 Pkt	70 PTT	86 Pcnt
1788580829	13.95 Volt	180 Pkt	50 PTT	86 Pcnt
1788577226	13.95 Volt	190 Pkt	50 PTT	76 Pcnt
1788573622	13.95 Volt	240 Pkt	70 PTT	78 Pcnt
1788570019	13.95 Volt	180 Pkt	50 PTT	79 Pcnt
1788566416	13.95 Volt	220 Pkt	50 PTT	72 Pcnt
1788562812	13.8 Volt	150 Pkt	40 PTT	80 Pcnt
1788559209	13.95 Volt	160 Pkt	50 PTT	76 Pcnt
1788555605	13.95 Volt	170 Pkt	50 PTT	74 Pcnt
1788552002	13.88 Volt	230 Pkt	50 PTT	78 Pcnt
1788548399	13.95 Volt	320 Pkt	60 PTT	78 Pcnt
1788544795	13.95 Volt	320 Pkt	60 PTT	82 Pcnt
1788541191	13.95 Volt	300 Pkt	60 PTT	80 Pcnt
1788537588	13.95 Volt	280 Pkt	50 PTT	77 Pcnt
1788533985	13.95 Volt	230 Pkt	50 PTT	80 Pcnt
1788530381	13.95 Volt	250 Pkt	60 PTT	71 Pcnt
1788526778	13.95 Volt	240 Pkt	50 PTT	73 Pcnt
1788523175	13.95 Volt	290 Pkt	60 PTT	80 Pcnt
1788519571	13.95 Volt	240 Pkt	60 PTT	79 Pcnt
1788515968	13.95 Volt	230 Pkt	50 PTT	77 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)