This is the latest recevied telemetry packets stored in our database for station/object PJUTFC-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time
Time*
Delay*
Speed*
Value4*
Value5*
1774176654
38 min
12 min
34 km/h
0
0
1774173003
39 min
13 min
33 km/h
0
0
1774169353
36 min
10 min
36 km/h
0
0
1774167401
37 min
11 min
35 km/h
0
0
1774163751
37 min
11 min
34 km/h
0
0
1774160101
39 min
13 min
33 km/h
0
0
1774156451
39 min
10 min
33 km/h
0
0
1774152827
39 min
10 min
33 km/h
0
0
1774149150
37 min
8 min
35 km/h
0
0
1774145500
36 min
7 min
36 km/h
0
0
1774141850
34 min
8 min
37 km/h
0
0
1774138200
31 min
5 min
41 km/h
0
0
1774134550
32 min
6 min
40 km/h
0
0
1774130900
29 min
3 min
45 km/h
0
0
*Used Equation Coefficients:
Time: 0, 1, 0
Delay: 0, 1, 0
Speed: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0). The sent equation coefficients is used in the equation: a * value2 + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)