This is the latest recevied telemetry packets stored in our database for station/object PJUTFC-4. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time
Time*
Delay*
Speed*
Value4*
Value5*
1774176660
59 min
13 min
48 km/h
0
0
1774173009
60 min
14 min
47 km/h
0
0
1774169359
62 min
16 min
46 km/h
0
0
1774167407
61 min
16 min
46 km/h
0
0
1774163757
60 min
14 min
47 km/h
0
0
1774160107
60 min
14 min
48 km/h
0
0
1774156457
60 min
14 min
47 km/h
0
0
1774152827
59 min
13 min
48 km/h
0
0
1774149156
62 min
16 min
46 km/h
0
0
1774145506
58 min
12 min
49 km/h
0
0
1774141856
54 min
8 min
53 km/h
0
0
1774138206
52 min
6 min
55 km/h
0
0
1774134556
51 min
5 min
56 km/h
0
0
1774130906
55 min
10 min
53 km/h
0
0
*Used Equation Coefficients:
Time: 0, 1, 0
Delay: 0, 1, 0
Speed: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0). The sent equation coefficients is used in the equation: a * value2 + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)