Overview Statistics Trail Chart Weather Telemetry Raw packets
 

This is the latest recevied telemetry packets stored in our database for station/object PJUTFC-5. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time Time* Delay* Speed* Value4* Value5*
1774176662 27 min 8 min 32 km/h 0 0
1774173012 26 min 7 min 33 km/h 0 0
1774169362 25 min 6 min 34 km/h 0 0
1774167410 26 min 7 min 33 km/h 0 0
1774163760 26 min 7 min 33 km/h 0 0
1774160110 29 min 10 min 30 km/h 0 0
1774156459 28 min 9 min 31 km/h 0 0
1774152827 29 min 10 min 29 km/h 0 0
1774149159 27 min 8 min 32 km/h 0 0
1774145509 23 min 4 min 37 km/h 0 0
1774141859 21 min 2 min 41 km/h 0 0
1774138209 19 min 0 min 44 km/h 0 0
1774134559 20 min 1 min 43 km/h 0 0
1774130909 19 min 0 min 46 km/h 0 0
*Used Equation Coefficients:
Time: 0, 1, 0
Delay: 0, 1, 0
Speed: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0

  • The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
  • Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
    The sent equation coefficients is used in the equation: a * value2 + b * value + c.
  • The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
  • The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
  • All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
  • A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)