This is the latest recevied telemetry packets stored in our database for station/object PJUTFC-6. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time
Time*
Delay*
Speed*
Value4*
Value5*
1774176665
36 min
10 min
36 km/h
0
0
1774173015
39 min
13 min
33 km/h
0
0
1774169365
36 min
11 min
35 km/h
0
0
1774167413
38 min
12 min
34 km/h
0
0
1774163763
37 min
12 min
34 km/h
0
0
1774160113
40 min
14 min
32 km/h
0
0
1774156463
37 min
11 min
35 km/h
0
0
1774152827
39 min
13 min
33 km/h
0
0
1774149162
37 min
12 min
34 km/h
0
0
1774145512
34 min
8 min
38 km/h
0
0
1774141862
31 min
5 min
41 km/h
0
0
1774138212
30 min
4 min
43 km/h
0
0
1774134562
29 min
3 min
45 km/h
0
0
1774130912
28 min
2 min
46 km/h
0
0
*Used Equation Coefficients:
Time: 0, 1, 0
Delay: 0, 1, 0
Speed: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0). The sent equation coefficients is used in the equation: a * value2 + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)