This is the latest recevied telemetry packets stored in our database for station/object PJUTFC-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time
Time*
Delay*
Speed*
Value4*
Value5*
1774176681
20 min
4 min
32 km/h
0
0
1774173030
20 min
5 min
32 km/h
0
0
1774169380
20 min
4 min
33 km/h
0
0
1774167428
20 min
4 min
33 km/h
0
0
1774163778
20 min
5 min
32 km/h
0
0
1774160128
21 min
5 min
31 km/h
0
0
1774156477
21 min
5 min
31 km/h
0
0
1774152828
20 min
4 min
32 km/h
0
0
1774149177
19 min
3 min
34 km/h
0
0
1774145527
18 min
3 min
35 km/h
0
0
1774141877
17 min
2 min
37 km/h
0
0
1774138227
17 min
1 min
38 km/h
0
0
1774134577
18 min
1 min
37 km/h
0
0
1774130927
18 min
1 min
37 km/h
0
0
*Used Equation Coefficients:
Time: 0, 1, 0
Delay: 0, 1, 0
Speed: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0). The sent equation coefficients is used in the equation: a * value2 + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)