This is the latest recevied telemetry packets stored in our database for station/object PJUTFC-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time
Time*
Delay*
Speed*
Value4*
Value5*
1774176687
36 min
12 min
22 km/h
0
0
1774173036
35 min
12 min
22 km/h
0
0
1774169386
34 min
10 min
23 km/h
0
0
1774167434
35 min
11 min
22 km/h
0
0
1774163784
36 min
13 min
21 km/h
0
0
1774160134
38 min
14 min
20 km/h
0
0
1774156484
37 min
13 min
21 km/h
0
0
1774152833
37 min
13 min
21 km/h
0
0
1774149183
36 min
13 min
21 km/h
0
0
1774145533
35 min
11 min
23 km/h
0
0
1774141883
31 min
7 min
25 km/h
0
0
1774138233
28 min
4 min
28 km/h
0
0
1774134583
27 min
3 min
29 km/h
0
0
1774130933
26 min
2 min
30 km/h
0
0
*Used Equation Coefficients:
Time: 0, 1, 0
Delay: 0, 1, 0
Speed: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0). The sent equation coefficients is used in the equation: a * value2 + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)