PJUMET-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object PJUMET-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Hum*	Pres*	Wind*	Rain*
1782109460	26.5 degC	84 %	1009 hPa	9 kmh	0.2 mm
1782107617	26.5 degC	84 %	1010 hPa	9 kmh	0.2 mm
1782105772	26.5 degC	86 %	1010 hPa	10 kmh	0.2 mm
1782103928	27 degC	86 %	1010 hPa	10 kmh	0.1 mm
1782100237	27 degC	85 %	1011 hPa	11 kmh	0.1 mm
1782098390	27 degC	84 %	1012 hPa	10 kmh	0.1 mm
1782096548	26.5 degC	86 %	1012 hPa	10 kmh	0.1 mm
1782076918	24 degC	95 %	1011 hPa	4 kmh	0.2 mm
1782075072	24 degC	95 %	1011 hPa	4 kmh	0.1 mm
1782073226	24 degC	95 %	1010 hPa	4 kmh	0.1 mm
1782071376	24 degC	96 %	1010 hPa	5 kmh	0.3 mm
1782069530	25 degC	84 %	1010 hPa	4 kmh	0 mm
1782067684	25.5 degC	83 %	1010 hPa	3 kmh	0 mm
1782062556	26 degC	80 %	1011 hPa	2 kmh	0.1 mm
1782060714	26 degC	79 %	1011 hPa	3 kmh	0 mm
1782058870	26 degC	78 %	1011 hPa	3 kmh	0 mm
1782057028	26 degC	77 %	1011 hPa	5 kmh	0 mm
1782055180	26 degC	77 %	1012 hPa	6 kmh	0 mm
1782053335	26 degC	78 %	1011 hPa	8 kmh	0 mm
1782040574	24.5 degC	97 %	1011 hPa	6 kmh	0.1 mm
1782038730	24.5 degC	96 %	1011 hPa	7 kmh	0.4 mm
1782036887	25 degC	94 %	1010 hPa	3 kmh	0.2 mm
1782035044	26 degC	91 %	1010 hPa	2 kmh	0.2 mm
1782033200	26.5 degC	87 %	1009 hPa	6 kmh	0.1 mm
1782031356	28 degC	79 %	1009 hPa	2 kmh	0.1 mm

*Used Equation Coefficients:

Temp: 0, 0.5, -20

Hum: 0, 1, 0

Pres: 0, 1, 800

Wind: 0, 1, 0

Rain: 0, 0.1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)