PJUMET-14 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object PJUMET-14. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Temp*	Hum*	Pres*	Wind*	Rain*
1778167500	26.5 degC	91 %	1009 hPa	1 kmh	0 mm
1778142359	27 degC	86 %	1006 hPa	1 kmh	0 mm
1778140515	27 degC	85 %	1006 hPa	0 kmh	0.1 mm
1778138670	27 degC	84 %	1006 hPa	6 kmh	0.1 mm
1778136825	28.5 degC	79 %	1006 hPa	7 kmh	0 mm
1778091126	24.5 degC	100 %	1009 hPa	5 kmh	0.1 mm
1778089281	24.5 degC	100 %	1010 hPa	4 kmh	0.1 mm
1778087436	24.5 degC	100 %	1010 hPa	4 kmh	0 mm
1778006298	24.5 degC	99 %	1008 hPa	5 kmh	0 mm
1778004443	24.5 degC	99 %	1009 hPa	4 kmh	0 mm
1778002597	24.5 degC	99 %	1009 hPa	4 kmh	0 mm
1777998945	24.5 degC	100 %	1010 hPa	2 kmh	0 mm
1777997073	24.5 degC	99 %	1010 hPa	2 kmh	0 mm
1777995226	24.5 degC	100 %	1010 hPa	5 kmh	0 mm
1777993359	24.5 degC	100 %	1010 hPa	8 kmh	0 mm
1777991490	25 degC	99 %	1010 hPa	6 kmh	0 mm
1777984889	26.5 degC	91 %	1008 hPa	3 kmh	0.8 mm
1777983040	26.5 degC	97 %	1008 hPa	3 kmh	0 mm
1777979311	27 degC	92 %	1007 hPa	2 kmh	0 mm
1777977459	27.5 degC	87 %	1007 hPa	1 kmh	0.1 mm
1777975613	28 degC	81 %	1006 hPa	3 kmh	0.1 mm
1777973765	29 degC	78 %	1006 hPa	4 kmh	0 mm
1777971910	29.5 degC	76 %	1006 hPa	5 kmh	0 mm
1777970062	29.5 degC	76 %	1005 hPa	3 kmh	0 mm
1777968217	29.5 degC	76 %	1005 hPa	0 kmh	0 mm

*Used Equation Coefficients:

Temp: 0, 0.5, -20

Hum: 0, 1, 0

Pres: 0, 1, 800

Wind: 0, 1, 0

Rain: 0, 0.1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)