PJUMET-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object PJUMET-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Hum*	Pres*	Wind*	Rain*
1782109466	28 degC	75 %	1009 hPa	20 kmh	0.1 mm
1782107623	28 degC	76 %	1009 hPa	19 kmh	0 mm
1782105778	27.5 degC	79 %	1010 hPa	18 kmh	0 mm
1782103934	27 degC	83 %	1010 hPa	16 kmh	0.1 mm
1782102089	26 degC	89 %	1010 hPa	14 kmh	0.1 mm
1782100242	26 degC	91 %	1011 hPa	14 kmh	0.2 mm
1782098396	26 degC	89 %	1012 hPa	16 kmh	0.2 mm
1782096554	26 degC	90 %	1012 hPa	17 kmh	0.1 mm
1782076924	25.5 degC	93 %	1010 hPa	10 kmh	0 mm
1782075078	25.5 degC	93 %	1010 hPa	10 kmh	0.1 mm
1782073232	25 degC	94 %	1010 hPa	11 kmh	0.1 mm
1782071382	25.5 degC	91 %	1010 hPa	15 kmh	0.3 mm
1782069536	26.5 degC	83 %	1010 hPa	13 kmh	0.1 mm
1782067690	26.5 degC	83 %	1010 hPa	12 kmh	0 mm
1782062562	27 degC	79 %	1011 hPa	14 kmh	0 mm
1782060719	27 degC	79 %	1011 hPa	14 kmh	0 mm
1782058876	27 degC	79 %	1011 hPa	15 kmh	0 mm
1782057033	27 degC	80 %	1011 hPa	16 kmh	0 mm
1782055186	27 degC	81 %	1012 hPa	16 kmh	0 mm
1782053341	27 degC	80 %	1012 hPa	16 kmh	0.1 mm
1782040580	27 degC	89 %	1011 hPa	2 kmh	0.2 mm
1782038735	27.5 degC	85 %	1010 hPa	3 kmh	0 mm
1782036893	28 degC	82 %	1010 hPa	9 kmh	0.1 mm
1782035049	28 degC	81 %	1009 hPa	10 kmh	0.1 mm
1782033205	28 degC	80 %	1009 hPa	10 kmh	0 mm

*Used Equation Coefficients:

Temp: 0, 0.5, -20

Hum: 0, 1, 0

Pres: 0, 1, 800

Wind: 0, 1, 0

Rain: 0, 0.1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)