LU2DXW-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LU2DXW-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	RxDrop*	RSSI*	Voltage*
1789954173	38 Pkt	0 Pkt	-31 dBm	13.64 V
1789952345	5 Pkt	0 Pkt	-33 dBm	13.62 V
1789950473	56 Pkt	20 Pkt	31 dBm	13.62 V
1789948645	31 Pkt	9 Pkt	31 dBm	13.62 V
1789946819	38 Pkt	1 Pkt	31 dBm	13.62 V
1789944993	56 Pkt	0 Pkt	31 dBm	13.62 V
1789943167	49 Pkt	16 Pkt	31 dBm	13.62 V
1789941339	47 Pkt	22 Pkt	31 dBm	13.64 V
1789939512	41 Pkt	15 Pkt	31 dBm	13.62 V
1789937684	39 Pkt	3 Pkt	31 dBm	13.64 V
1789935858	32 Pkt	0 Pkt	31 dBm	13.62 V
1789934032	40 Pkt	0 Pkt	31 dBm	13.62 V
1789932204	31 Pkt	0 Pkt	31 dBm	13.64 V
1789930378	31 Pkt	0 Pkt	31 dBm	13.62 V
1789928551	46 Pkt	0 Pkt	31 dBm	13.64 V
1789926726	37 Pkt	0 Pkt	31 dBm	13.64 V
1789924900	39 Pkt	0 Pkt	31 dBm	13.62 V
1789923072	40 Pkt	0 Pkt	31 dBm	13.62 V
1789921246	68 Pkt	4 Pkt	31 dBm	13.62 V
1789919417	61 Pkt	0 Pkt	31 dBm	13.62 V
1789917589	53 Pkt	0 Pkt	31 dBm	13.64 V
1789915763	52 Pkt	0 Pkt	31 dBm	13.62 V
1789912108	88 Pkt	0 Pkt	31 dBm	13.62 V
1789910280	70 Pkt	0 Pkt	31 dBm	13.62 V
1789908477	42 Pkt	0 Pkt	31 dBm	13.64 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)