This is the latest recevied telemetry packets stored in our database for station/object HB9BBE-17. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time
Press*
Temp.in*
Hum*
QNH*
Temp.out*
1781422919
944.6 hPa
23.7 C deg
45.2 %
1024.5 hPa
0 C deg
1781415656
945 hPa
23.4 C deg
45.6 %
1025.1 hPa
0 C deg
1781402953
945.5 hPa
23.4 C deg
45.9 %
1025.7 hPa
0 C deg
1780931031
944 hPa
25.8 C deg
40.2 %
1023.3 hPa
0 C deg
1780917722
945.3 hPa
24.8 C deg
44.2 %
1022.9 hPa
0 C deg
1780758813
943.5 hPa
24.1 C deg
42.7 %
1020 hPa
0 C deg
1780742476
943.5 hPa
23.6 C deg
42.8 %
1020.1 hPa
0 C deg
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0). The sent equation coefficients is used in the equation: a * value2 + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)