DL5DAE-8 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DL5DAE-8. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Humi*	Baro*
1761491997	12.5 deg C	66.5 %	1003.9 hPa
1761491097	12.5 deg C	66.6 %	1004 hPa
1761490197	12.5 deg C	66.7 %	1004.1 hPa
1761489297	12.5 deg C	66.8 %	1003.8 hPa
1761488397	12.5 deg C	66.9 %	1003.8 hPa
1761487497	12.5 deg C	67 %	1003.8 hPa
1761486597	12.5 deg C	66.9 %	1003.8 hPa
1761485697	12.5 deg C	66.8 %	1003.6 hPa
1761483896	12.5 deg C	66.5 %	1003.2 hPa
1761482666	12.5 deg C	66.5 %	1003.1 hPa
1761479065	12.4 deg C	65.8 %	1002.4 hPa
1761478165	12.4 deg C	65.9 %	1002.6 hPa
1761477265	12.4 deg C	65.8 %	1002.4 hPa
1761476365	12.4 deg C	65.5 %	1002.4 hPa
1761475465	12.4 deg C	65.1 %	1002.2 hPa
1761474565	12.3 deg C	64.7 %	1002.2 hPa
1761473665	12.3 deg C	64.5 %	1002.1 hPa
1761472765	12.3 deg C	64.2 %	1001.9 hPa
1761471865	12.3 deg C	63.6 %	1001.8 hPa
1761470964	12.3 deg C	63.4 %	1001.5 hPa
1761470632	12.3 deg C	63.3 %	1001.4 hPa
1761468832	12.3 deg C	62.7 %	1001 hPa
1761467932	12.2 deg C	62.2 %	1000.8 hPa
1761467032	12.3 deg C	62.1 %	1000.8 hPa
1761466132	12.2 deg C	61.4 %	1000.4 hPa

*Used Equation Coefficients:

Temp: 0, 0.1, 0

Humi: 0, 0.1, 0

Baro: 0, 0.1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)