W9GIL-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W9GIL-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	CPU Temperature*	CPU Usage*
1761600002	43 Deg.C	3 %
1761599402	44 Deg.C	3 %
1761598806	43 Deg.C	3 %
1761598202	42 Deg.C	3 %
1761597606	44 Deg.C	3 %
1761597002	43 Deg.C	3 %
1761595802	44 Deg.C	3 %
1761595202	44 Deg.C	3 %
1761594606	44 Deg.C	3 %
1761594002	43 Deg.C	3 %
1761593406	42 Deg.C	3 %
1761592802	42 Deg.C	3 %
1761592206	44 Deg.C	3 %
1761591601	42 Deg.C	3 %
1761591002	44 Deg.C	3 %
1761590406	44 Deg.C	3 %
1761589801	43 Deg.C	3 %
1761588602	44 Deg.C	3 %
1761588006	42 Deg.C	3 %
1761587401	42 Deg.C	3 %
1761586801	44 Deg.C	3 %
1761586206	43 Deg.C	3 %
1761585601	44 Deg.C	3 %
1761585007	43 Deg.C	3 %
1761583806	43 Deg.C	3 %

*Used Equation Coefficients:

CPU Temperature: 0, 0.1, 0

CPU Usage: 0, 1, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)