M0WHP-7 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object M0WHP-7. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temperatura CPU*	Obciazenie CPU*
1780573621	48 Deg.C	4 %
1780573562	48 Deg.C	4 %
1780573501	48 Deg.C	4 %
1780573442	47 Deg.C	4 %
1780573382	48 Deg.C	4 %
1780573321	48 Deg.C	4 %
1780573262	48 Deg.C	4 %
1780573201	48 Deg.C	4 %
1780573142	48 Deg.C	4 %
1780573082	48 Deg.C	4 %
1780573027	48 Deg.C	4 %
1780572962	48 Deg.C	4 %
1780572903	48 Deg.C	4 %
1780572842	48 Deg.C	4 %
1780572781	48 Deg.C	4 %
1780572722	48 Deg.C	4 %
1780572666	48 Deg.C	4 %
1780572606	48 Deg.C	4 %
1780572546	48 Deg.C	4 %
1780572486	48 Deg.C	4 %
1780572421	48 Deg.C	4 %
1780572362	47 Deg.C	4 %
1780572301	48 Deg.C	4 %
1780572242	48 Deg.C	4 %
1780572182	48 Deg.C	4 %

*Used Equation Coefficients:

Temperatura CPU: 0, 0.1, 0

Obciazenie CPU: 0, 1, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)