F4FRG-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object F4FRG-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1784714481	7.65 Volt	60 Pkt	30 Pkt	60 Pcnt
1784713578	7.65 Volt	50 Pkt	30 Pkt	58 Pcnt
1784713278	7.65 Volt	50 Pkt	20 Pkt	58 Pcnt
1784712977	7.65 Volt	40 Pkt	20 Pkt	53 Pcnt
1784712679	7.65 Volt	30 Pkt	20 Pkt	50 Pcnt
1784712377	7.65 Volt	30 Pkt	20 Pkt	47 Pcnt
1784711789	7.65 Volt	30 Pkt	20 Pkt	50 Pcnt
1784711176	7.65 Volt	20 Pkt	10 Pkt	44 Pcnt
1784710875	7.65 Volt	20 Pkt	20 Pkt	46 Pcnt
1784710575	7.65 Volt	20 Pkt	20 Pkt	44 Pcnt
1784710275	7.65 Volt	30 Pkt	20 Pkt	46 Pcnt
1784709974	7.65 Volt	20 Pkt	20 Pkt	43 Pcnt
1784708773	7.65 Volt	20 Pkt	10 Pkt	36 Pcnt
1784708473	7.65 Volt	20 Pkt	10 Pkt	37 Pcnt
1784707872	7.65 Volt	20 Pkt	10 Pkt	37 Pcnt
1784707572	7.65 Volt	30 Pkt	10 Pkt	40 Pcnt
1784706976	7.65 Volt	30 Pkt	10 Pkt	44 Pcnt
1784706671	7.65 Volt	50 Pkt	20 Pkt	54 Pcnt
1784706071	7.65 Volt	60 Pkt	20 Pkt	61 Pcnt
1784705770	7.65 Volt	70 Pkt	30 Pkt	71 Pcnt
1784705472	7.65 Volt	80 Pkt	30 Pkt	76 Pcnt
1784705170	7.65 Volt	80 Pkt	30 Pkt	77 Pcnt
1784704870	7.65 Volt	90 Pkt	40 Pkt	74 Pcnt
1784704569	7.65 Volt	90 Pkt	40 Pkt	72 Pcnt
1784704269	7.73 Volt	100 Pkt	40 Pkt	74 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)