JH4KWH-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object JH4KWH-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Solar*	Batt*	Vin*	Rx1h*	Temp*
1753692096	0.23 A	-0.23 A	12.8 Volt	10 Pkt	98.6 'F
1753690302	0.35 A	-0.23 A	12.88 Volt	0 Pkt	100.4 'F
1753689393	0.35 A	-0.23 A	12.88 Volt	20 Pkt	100.4 'F
1753688492	0.35 A	-0.23 A	12.88 Volt	10 Pkt	101.3 'F
1753687591	0.35 A	-0.12 A	12.88 Volt	10 Pkt	101.3 'F
1753686690	0.35 A	-0.12 A	12.96 Volt	0 Pkt	102.2 'F
1753685790	0.35 A	-0.12 A	12.96 Volt	20 Pkt	104 'F
1753684889	0.35 A	-0.12 A	12.96 Volt	0 Pkt	104.9 'F
1753683988	0.35 A	-0.12 A	12.96 Volt	0 Pkt	105.8 'F
1753683087	0.35 A	-0.12 A	13.04 Volt	0 Pkt	106.7 'F
1753682186	0.35 A	-0.12 A	13.04 Volt	20 Pkt	107.6 'F
1753681285	0.46 A	-0.12 A	13.04 Volt	0 Pkt	108.5 'F
1753680384	0.46 A	-0.12 A	13.11 Volt	10 Pkt	111.2 'F
1753679483	0.46 A	-0 A	13.11 Volt	0 Pkt	111.2 'F
1753678600	0.46 A	-0 A	13.19 Volt	10 Pkt	109.4 'F
1753677682	0.81 A	0.35 A	14.22 Volt	10 Pkt	107.6 'F
1753676781	0.92 A	0.35 A	14.22 Volt	0 Pkt	107.6 'F
1753675880	0.92 A	0.23 A	14.3 Volt	0 Pkt	107.6 'F
1753674979	0.58 A	0.35 A	14.3 Volt	20 Pkt	107.6 'F
1753674078	0.46 A	0.46 A	14.38 Volt	0 Pkt	107.6 'F
1753673177	0.92 A	0.46 A	14.38 Volt	0 Pkt	107.6 'F
1753672276	0.92 A	0.12 A	14.22 Volt	0 Pkt	106.7 'F
1753671376	1.04 A	0.23 A	14.38 Volt	20 Pkt	108.5 'F
1753670475	1.27 A	0.69 A	14.3 Volt	10 Pkt	108.5 'F
1753669574	1.27 A	0.81 A	14.38 Volt	10 Pkt	108.5 'F

*Used Equation Coefficients:

Solar: 0, 0.1156, -14.6812

Batt: 0, 0.1156, -14.6812

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Temp: 0, 0.9, -83.2

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)