DL3YCW-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DL3YCW-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	Hum*	QNH*	Temp.out*
1775088555	1008.2 hPa	21.7 C deg	42.9 %	1025.4 hPa	0 C deg
1775088554	1008.2 hPa	21.7 C deg	42.9 %	1025.4 hPa	0 C deg
1775086736	1008.6 hPa	21.8 C deg	42.8 %	1025.7 hPa	0 C deg
1775086736	1008.6 hPa	21.8 C deg	42.8 %	1025.7 hPa	0 C deg
1775084917	1008.6 hPa	21.9 C deg	42.6 %	1025.8 hPa	0 C deg
1775083114	1008.9 hPa	22 C deg	42.5 %	1026.1 hPa	0 C deg
1775083114	1008.9 hPa	22 C deg	42.5 %	1026.1 hPa	0 C deg
1775081305	1009 hPa	22.1 C deg	42.3 %	1026.2 hPa	0 C deg
1775079491	1009.2 hPa	22.2 C deg	42.1 %	1026.3 hPa	0 C deg
1775079490	1009.2 hPa	22.2 C deg	42.1 %	1026.3 hPa	0 C deg
1775077674	1009.3 hPa	22.3 C deg	41.9 %	1026.5 hPa	0 C deg
1775077674	1009.3 hPa	22.3 C deg	41.9 %	1026.5 hPa	0 C deg
1775075862	1009.6 hPa	22.5 C deg	41.8 %	1026.8 hPa	0 C deg
1775074027	1010 hPa	22.6 C deg	41.6 %	1027.2 hPa	0 C deg
1775074023	1010 hPa	22.6 C deg	41.6 %	1027.2 hPa	0 C deg
1775072242	1010.2 hPa	22.7 C deg	41.6 %	1027.4 hPa	0 C deg
1775072237	1010.2 hPa	22.7 C deg	41.6 %	1027.4 hPa	0 C deg
1775070431	1010.4 hPa	22.8 C deg	41.5 %	1027.5 hPa	0 C deg
1775068578	1010.5 hPa	22.8 C deg	41.4 %	1027.6 hPa	0 C deg
1775068578	1010.5 hPa	22.8 C deg	41.4 %	1027.6 hPa	0 C deg
1775066785	1010.4 hPa	22.8 C deg	41.4 %	1027.6 hPa	0 C deg
1775066785	1010.4 hPa	22.8 C deg	41.4 %	1027.6 hPa	0 C deg
1775064951	1010.4 hPa	22.9 C deg	41.3 %	1027.5 hPa	0 C deg
1775064951	1010.4 hPa	22.9 C deg	41.3 %	1027.5 hPa	0 C deg
1775063135	1010.5 hPa	22.9 C deg	41.3 %	1027.7 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)