SK5UM-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SK5UM-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1780588134	0.03 Rx Erlang	0.02 Tx Erlang	21 count/10m	0 count/10m	14 count/10m
1780586934	0.02 Rx Erlang	0.02 Tx Erlang	20 count/10m	0 count/10m	13 count/10m
1780585733	0.03 Rx Erlang	0.02 Tx Erlang	23 count/10m	0 count/10m	15 count/10m
1780584533	0.03 Rx Erlang	0.02 Tx Erlang	23 count/10m	0 count/10m	14 count/10m
1780583334	0.03 Rx Erlang	0.02 Tx Erlang	22 count/10m	0 count/10m	15 count/10m
1780582134	0.03 Rx Erlang	0.02 Tx Erlang	28 count/10m	0 count/10m	17 count/10m
1780580934	0.02 Rx Erlang	0.02 Tx Erlang	20 count/10m	0 count/10m	13 count/10m
1780579734	0.02 Rx Erlang	0.02 Tx Erlang	19 count/10m	0 count/10m	13 count/10m
1780578534	0.02 Rx Erlang	0.01 Tx Erlang	19 count/10m	0 count/10m	12 count/10m
1780577334	0.02 Rx Erlang	0.02 Tx Erlang	24 count/10m	0 count/10m	15 count/10m
1780576133	0.02 Rx Erlang	0.02 Tx Erlang	19 count/10m	0 count/10m	12 count/10m
1780574933	0.02 Rx Erlang	0.02 Tx Erlang	20 count/10m	0 count/10m	14 count/10m
1780573734	0.03 Rx Erlang	0.02 Tx Erlang	23 count/10m	0 count/10m	15 count/10m
1780572534	0.03 Rx Erlang	0.02 Tx Erlang	25 count/10m	0 count/10m	15 count/10m
1780571334	0.03 Rx Erlang	0.02 Tx Erlang	19 count/10m	0 count/10m	13 count/10m
1780570134	0.02 Rx Erlang	0.01 Tx Erlang	13 count/10m	0 count/10m	8 count/10m
1780568934	0.01 Rx Erlang	0.01 Tx Erlang	12 count/10m	0 count/10m	8 count/10m
1780567734	0.01 Rx Erlang	0.01 Tx Erlang	11 count/10m	0 count/10m	8 count/10m
1780566534	0.01 Rx Erlang	0.01 Tx Erlang	12 count/10m	0 count/10m	9 count/10m
1780565334	0.01 Rx Erlang	0.01 Tx Erlang	10 count/10m	0 count/10m	9 count/10m
1780564133	0.01 Rx Erlang	0.01 Tx Erlang	13 count/10m	0 count/10m	9 count/10m
1780562934	0.01 Rx Erlang	0.01 Tx Erlang	12 count/10m	0 count/10m	8 count/10m
1780561734	0.01 Rx Erlang	0.01 Tx Erlang	12 count/10m	0 count/10m	9 count/10m
1780560534	0.01 Rx Erlang	0.01 Tx Erlang	11 count/10m	0 count/10m	8 count/10m
1780559334	0.02 Rx Erlang	0.01 Tx Erlang	13 count/10m	0 count/10m	9 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)