DK5AI-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DK5AI-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	QNH*	Temp.out*
1781372107	973.9 hPa	24.2 C deg	1015.1 hPa	0 C deg
1781370292	973.6 hPa	25.9 C deg	1014.5 hPa	0 C deg
1781368477	973.3 hPa	26.3 C deg	1014.2 hPa	0 C deg
1781366662	973.5 hPa	29.4 C deg	1013.9 hPa	0 C deg
1781364862	973.3 hPa	28.5 C deg	1013.8 hPa	0 C deg
1781364847	973.3 hPa	28.5 C deg	1013.8 hPa	0 C deg
1781363071	973 hPa	31.3 C deg	1013.1 hPa	0 C deg
1781363032	973 hPa	31.3 C deg	1013.1 hPa	0 C deg
1781361231	972.8 hPa	30.4 C deg	1013.1 hPa	0 C deg
1781359402	972.7 hPa	31.6 C deg	1012.7 hPa	0 C deg
1781357609	973.2 hPa	28.4 C deg	1013.7 hPa	0 C deg
1781357587	973.2 hPa	28.4 C deg	1013.7 hPa	0 C deg
1781355771	973.2 hPa	31 C deg	1013.4 hPa	0 C deg
1781353978	973.1 hPa	28.2 C deg	1013.7 hPa	0 C deg
1781353956	973.1 hPa	28.2 C deg	1013.7 hPa	0 C deg
1781352141	973.5 hPa	28.1 C deg	1014.1 hPa	0 C deg
1781350325	973.7 hPa	28.5 C deg	1014.2 hPa	0 C deg
1781349433	973.8 hPa	29.8 C deg	1014.2 hPa	0 C deg
1781348525	973.8 hPa	29.8 C deg	1014.2 hPa	0 C deg
1781348510	973.8 hPa	29.8 C deg	1014.2 hPa	0 C deg
1781346709	974.1 hPa	25.8 C deg	1015 hPa	0 C deg
1781346695	974.1 hPa	25.8 C deg	1015 hPa	0 C deg
1781344879	974.3 hPa	25.7 C deg	1015.3 hPa	0 C deg
1781343085	974.3 hPa	25.5 C deg	1015.3 hPa	0 C deg
1781343064	974.3 hPa	25.5 C deg	1015.3 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)